Passivity-based control of a wound-rotor synchronous motor

Authors

A. Dòria-Cerezo, C. Batlle, G. Espinosa-Pérez

Abstract

This study presents a new non-linear passivity-based controller for a wound-rotor synchronous machine, acting as a motor drive. The control objectives are stated in the dq-frame, and the port-controlled Hamiltonian model is also obtained. A power flow analysis allows to state the control goals in terms of ohmic losses reduction, and motivates the use of the field current for the reactive power compensation. From the Hamiltonian structure, the simultaneous interconnection and damping assignment technique is used to compute the control action, which results in a controller with a simpler architecture than the standard one for this class of machines, able to cope with both positive and negative external mechanical loads and having thus bidirectional power capabilities. The robustness of the control action is also taken into account in the design procedure. Finally, the computed controller is validated via numerical simulations.

Citation

Journal: IET Control Theory & Applications
Year: 2010
Volume: 4
Issue: 10
Pages: 2049–2057
Publisher: Institution of Engineering and Technology (IET)
DOI: 10.1049/iet-cta.2009.0641

BibTeX

@article{Do_ria_Cerezo_2010,
  title={{Passivity-based control of a wound-rotor synchronous motor}},
  volume={4},
  ISSN={1751-8652},
  DOI={10.1049/iet-cta.2009.0641},
  number={10},
  journal={IET Control Theory &amp; Applications},
  publisher={Institution of Engineering and Technology (IET)},
  author={Dòria-Cerezo, A. and Batlle, C. and Espinosa-Pérez, G.},
  year={2010},
  pages={2049--2057}
}

Download the bib file

References

Rossi, Proc. IEEE Industry Applications Conf. (2006)
Schaefer, R. C. Excitation control of the synchronous motor. IEEE Trans. on Ind. Applicat. 35, 694–702 (1999) – 10.1109/28.767025
Leonhard, W. Control of Electrical Drives. (Springer Berlin Heidelberg, 1996). doi:10.1007/978-3-642-97646-9 – 10.1007/978-3-642-97646-9
Senesky, Proc. IEEE Applied Power Electronics Conf. and Exposition (2004)
Ho, E. & Sen, P. C. High-performance decoupling control techniques for various rotating field machines. IEEE Trans. Ind. Electron. 42, 40–49 (1995) – 10.1109/41.345844
Magri, Proc. IEEE Int. Conf. on Control Applications (2006)
Marino, R., Tomei, P. & Verrelli, C. M. Adaptive Field-oriented Control of Synchronous Motors with Damping Windings. European Journal of Control 14, 177–195 (2008) – 10.3166/ejc.14.177-195
Zeraoulia, M., Benbouzid, M. E. H. & Diallo, D. Electric Motor Drive Selection Issues for HEV Propulsion Systems: A Comparative Study. IEEE Trans. Veh. Technol. 55, 1756–1764 (2006) – 10.1109/tvt.2006.878719
Nicklasson, P. J., Ortega, R., Espinosa-Perez, G. & Jacobi, C. G. J. Passivity-based control of a class of Blondel-Park transformable electric machines. IEEE Trans. Automat. Contr. 42, 629–647 (1997) – 10.1109/9.580867
Espinosa-Pérez, Proc. IEEE Int. Symp. on Industrial Electronics (1997)
Guo, (2007)
Ortega, R., van der Schaft, A., Maschke, B. & Escobar, G. Interconnection and damping assignment passivity-based control of port-controlled Hamiltonian systems. Automatica 38, 585–596 (2002) – 10.1016/s0005-1098(01)00278-3
Rodríguez, H. & Ortega, R. Stabilization of electromechanical systems via interconnection and damping assignment. Intl J Robust & Nonlinear 13, 1095–1111 (2003) – 10.1002/rnc.804
Batlle, C., Dòria-Cerezo, A. & Ortega, R. Power Flow Control of a Doubly-Fed Induction Machine Coupled to a Flywheel. European Journal of Control 11, 209–221 (2005) – 10.3166/ejc.11.209-221
Petrovic, V., Ortega, R. & Stankovi, A. M. Interconnection and damping assignment approach to control of PM synchronous motors. IEEE Trans. Contr. Syst. Technol. 9, 811–820 (2001) – 10.1109/87.960344
Batlle, C., Dòria-Cerezo, A., Espinosa-Pérez, G. & Ortega, R. Simultaneous interconnection and damping assignment passivity-based control: the induction machine case study. International Journal of Control 82, 241–255 (2009) – 10.1080/00207170802050817
Ortega, (2001)
Dalsmo, M. & van der Schaft, A. On Representations and Integrability of Mathematical Structures in Energy-Conserving Physical Systems. SIAM J. Control Optim. 37, 54–91 (1998) – 10.1137/s0363012996312039
van der Schaft, Proc. Second IFAC Symp. on Nonlinear Control Systems Design, (NOLCOS’92) (1992)
Fujimoto, K. & Sugie, T. Canonical transformation and stabilization of generalized Hamiltonian systems. Systems & Control Letters 42, 217–227 (2001) – 10.1016/s0167-6911(00)00091-8
Ortega, R. & García-Canseco, E. Interconnection and Damping Assignment Passivity-Based Control: A Survey. European Journal of Control 10, 432–450 (2004) – 10.3166/ejc.10.432-450
Krause, P. C., Wasynczuk, O. & Sudhoff, S. D. Analysis of Electric Machinery and Drive Systems. (2002) doi:10.1109/9780470544167 – 10.1109/9780470544167
Chiasson, J. Modeling and High‐Performance Control of Electric Machines. (2005) doi:10.1002/0471722359 – 10.1002/0471722359
van der Schaft, A. L2 - Gain and Passivity Techniques in Nonlinear Control. Communications and Control Engineering (Springer London, 2000). doi:10.1007/978-1-4471-0507-7 – 10.1007/978-1-4471-0507-7
Batlle, Proc. IEEE Conf. on Decision and Control (2008)